Link to Angewandte Link to IOA

DDPlab Digital Design & Production | IoA Institute of Architecture | University of Applied Arts Vienna

TROTEC Speedy 500 Lasercutter

DSC_3195TROTEC Speedy 500 Lasercutter

Materials:

  • Acrylics:
    Acrylic glass
    Plexiglas®
    PMMA
    Perspex®
    Altuglas®
    Acrylite®
  • Foams:
    Polyester (PES)
    Polyethylene (PE)
    Polyurethane (PUR)
    Neopren®
  • Paper:
    Paper (fine or art paper, uncoated paper) up to 600 grams
    Paperboard
    Cardboard
    Corrugated cardboard
  • Wood:
    Alder, beech, balsa, cedar genuine, fine and natural wood
    MDF
    Solid timber
    solid wood
    veneer

 

Machine Data:

  • WORKAREA  X1245 x Y710 x Z10 mm (depending on material)

Convenient Software Toolchains:

 

The settings for each material and its different thicknesses you will find in the RESOURCES section of this webpage and in the physical binder lying next to the Computer connected to the Lasercutter  in the Production Lab!

IN GENERAL make yourself familiar with the Trotect Material Recommendations before you lasercut any uncommon material in our lab. If you are unsure ask us and wait until then and don’t experiment on your own!
And always keep in mind that a laser is dangerous as it can IGNITE your stock. Therefore:

 

never_leave_the_laser_cutter_unattended

Comments are closed.